Inside Ocean Study
One display. Every layer.
- 01Acrylic base
Thick clear acrylic with a pocket that holds the slab.
- 02Your graded slab
Sits in the pocket — card and grading label stay together.
- 03Ocean Study Soul
Printed surround with open label and card windows.
- 04Magnetic lid
Lifts straight off. Corner magnets hold it closed — no screws.
Illustrative assembly using Ocean Study. Acrylic thickness follows the Acrylic Brick’s listed 24–30 mm depth; final insert position and fit are confirmed with physical samples.
Choose the right display / 02
Two cases. Different purposes.
Outer size describes the display.
The inner pocket determines what goes inside.
Front elevation · nominal dimensions
Corners and closure are illustrative.
Acrylic Brick
An oversized cavity intended for a slab with a guard. Measure the complete guarded slab before choosing.
- Outside · W × H
- 112.0 × 166.0 mm
- Overall depth
- 24.0–30.0 mm
- Inner pocket · W × H × D
- 88.0 × 142.0 × 11.5 mm
- Listed empty weight
- 380–450 g
- Display orientation
- Vertical / self-standing design
Material & closure notes
Supplied specifications, pending verification against the actual batch:
- High-density optical cast acrylic (listed as 100%).
- Four corner magnets, described as neodymium N52.
- Tool-free closure; plate thickness varies.
- UV block claim: 96–99.9%, grade dependent. Not independently tested for CardSoul; no protection guarantee.
Its physical print size and the label/card openings are still to be measured. The examples can be previewed now, but are not print-ready cutting templates. An 88 × 142 mm cavity is not automatically the correct paper size.
Optional · Check measurements
A preview isn’t a fit check.
A photo has no known scale, so the Studio can’t measure your slab. If you want to compare sizes, enter measurements from a ruler or the manufacturer. We’ll confirm real dimensions before offering each design.